Status: Upgrade now
-
Control – Upgrade UNICONTROL 1
UNICONTROL 1 End of life! Conversion to UNICONTROL 2+/UNICONTROL 3 is imminent. To secure the function and avoid a loss in production, we strongly recommend having the equipment that is still running on UNICONTROL 1 converted. To benefit from the latest technology, features, and usability, it is essential to upgrade your machine to UNICONTROL 2+/UNICONTROL…
-
ARTER gearboxes
«ARTER» gearboxesUpgrade to the latest servo technology «ARTER» gearbox has reached end-of-life! Why upgrade? We have received notification from our supplier that production of the «ARTER» gearboxes are discontinued as of June 2026. In addition, revisions and servicing of these gearboxes are no longer available since June 2026. This development will affect the operation of…
-
PCE or UNICOAT – conversion to SOUCOAT P-80S / P-120S
PCE or UNICOAT conversion to SOUCOAT P-80S / P-120S 06.2026 – End of life Retrofitting PCE and UNICOAT powder systems can be equipped with the new high voltage technology (HVS-400), as well as the new Powder application unit (CPF-400). In combination with a powder spray arm with the proven Cumulus spray head (PSA-Cumulus), the system…
-
ORC, DRC roller coating systems
Upgrade ORC, DRC roller coating systems ORC, DRC controls with EATON MOELLER PLCs have reached end-of-life! Why upgrade? Since many electronic components used in older Frei AG systems are getting phased-out by suppliers, the need to adapt electrical systems to accommodate new equivalent replacements is ever increasing. This is the best opportunity to not only…
-
BPC, SPC powder systems
Upgrade of BPC, SPC powder (coating) systems 02.2025 Why upgrade? As many electronic components used in older Frei AG systems are getting phased-out by suppliers, the need to adapt electrical systems to accommodate new equivalent replacements is ever increasing. This is the best opportunity to not only restore old functionality but to upgrade to the…
-
PCA & PCB, ECM & FCM gas curing systems
Upgrade of PCA & PCB, ECM & FCM gas curing systems 02.2025 Why upgrade? Since many electronic components used in older Frei AG systems are getting phased-out by suppliers, the need to adapt electrical systems to accommodate new equivalent replacements is ever increasing. This is the best opportunity to not only restore old functionality but…
-
APC, EPC, LPC
APC, EPC, LPC – Upgrade packages due to phase-out of major components 06.2024 – End of life Retrofitting ACP, EPC, LPC powder units can be upgraded to most of the latest technologies in today’s Frei AG systems. Instead of investing in new lower quality equipment, you could perhaps consider modernizing your existing system now. Advantages…
-
UNISOUD to PULSAR
Upgrade from UNISOUD to PULSAR UNISOUD converter has reached end-of-life! For machine types with rotary frequency converters (no UNISOUD technology), please refer to the conversion Static Frequency Converter PULSAR Why upgrade? Since its development by Soudronic in 1992, the pioneering achievement of the static UNISOUD welding current converter has been in reliable operation in more…
-
Drive system update
Drive system update ST1, PAM/SAM and DMC drive systems Upgrading the ST1, PAM/SAM and DMC drive systems to the Soudronic solution for new drive systems. The production of PAM/ST1, PAM/SAM and DMC drive systems was discontinued by the manufacturers years ago. In the meantime, our stock is used up as well, and conversion to a…
-
Lenze Drives Upgrade
Lenze drives upgrade: 8200/9300 Lenze to Siemens inverters Lenze 8200/9300 and VT300 are obsolete. Full upgrade to Siemens PLC, inverters, and HMI available now. Lenze 8200/9300 have been discontinued in April 2025 Why upgrade? The 8200 and 9300 inverter series from Lenze were phased-out of regular production in 2020. The VT300 control panels are no…
-
Servostar600 to SC6
TSN slitter drives conversion: Servostar600 to SC6 Servostar600 drive system is end-of-live! Conversion to SC6 is imminent. Upgrade for Servostar600 drive system The production of the cards in the Servostar600 drive system was discontinued by the manufacturer for years. In the meantime , our stock is used up as well and a conversion to new…
-
DMC to protego
TSN slitter drives conversion: DMC to protego DMC drive system is end-of-live! Conversion to PROTEGO is imminent. Upgrade for DMC drive system The production of the DMC drive system was discontinued by the manufacturer for years. In the meantime , our stock is used up as well and a conversion to new drive system inevitable.…
-
Conversion to UNICONTROL
Conversion to UNICONTROL Control 86 has reached end-of-life! Conversion to UNICONTROL is imminent. We can no longer guarantee the function and support of control 86. For more than 10 years we have been informing our customers about this situation. Due to discontinuation of specific electronic parts on CPU components, tolerance problem on components for the…